Wednesday, March 17, 2010

The wave building

I have done an example of a building in a wave form - a number of you have had some questions about this.  I think it is also a useful example to look at, even if you are not doing wavy buildings.

You can change various parameters - one subnet generated the wave curve, and another subnet then offsets the curve. This offset was harder than it might first seem, since you have to try and avoid self intersecting forms. The example also displays the total floor area - which can be very useful.

Flu

I have been a bit unwell today, so I will work from home. I will  conduct tutorials etc from home all of tomorrow. If you have technical queries, then send me the file via email. If you want to have discussions, then we can phone or skype.

Wednesday, March 10, 2010

Passive Zone Proportion

I have created a Houdini node to calculate the Passive Zone Proportion (PZP), as described in the book "Energy and Environment in Architecture: A Technical Design Guide", by Nick Baker and Koen Steemers.

The PZP compares the floor area a certain distance from the facade to the total floor area. So for example, if you set the range to be 6 meters, then it will calculate the total % floor area that is 6 meters from the facade. This area of the floor is called the passive zone, since it has the potential to be passively lit and ventilated. 

Usually, the depth passive zone is assumed to be twice the floor to ceiling height. So if your space if 4 meters hight, the passive zone is the floor area 8 meters from the facade.

The node is a bit more flexible, and it allows you to enter multiple ranges. For example, if you enter "3, 6, 9", then it will calculate 4 values: 1) the percentage floor area between 0 and 3 meters from the facade, 2) the percentage between 3 and 6 meters, 3) the percentage between 6 and 9 meters, and 4) the percentage above 9 meters.

Thursday, March 4, 2010

Update

On Monday we came to the following overall breakdown of the 5 million square meters:

  • Assume that there are 100,000 people working and living on our site. There will be some overlap between these groups - i.e. some people will be both working and living there. But there will also be some people who live there but work elsewhere, and some people who work there but live elsewhere. But I guess that it would be safe to assume that most of the 100,000 people who are living there will be working either within our site or close by somewhere in the CBD. This may affect how you approach the issue of parking. 
  • For office, we can assume 20m2 per person. So for 100,000 people, we get 2 million square meters of office. You can assume that office space is fully air-conditioned. A key challenge will be daylight - how to make sure that offices get reasonable daylight.
  • For living, we will need to break down the remaining 3 million square meters into 1) residential, and 2) other activities (shopping, recreation, etc). 
  • In order to get some idea about the amount of space required for the other activities, we need to know the number of households. The current average for Singapore is 3.5 people per household, so that is 28,571 households. Lets round it up to 30,000 (since the overall trend is that households are getting smaller). Based on 30,000 households we can use Belinda's paper to calculate that we need about 0.2 million square meters. You need to think where to put this space - and how it relates to residential and office spaces.
  • This leaves 2.8 million square meters for residential.  So if we assume 30,000 households, then we get 93 m2 per household. Note that this includes common circulation and any other common spaces in addition to the size of the actual flat. I am not sure what the percentage is - but lets say it around 14% - then we get the average floor area of the flat to be about 80 m2 for 3.5 people, which is about 23 m2 per person. This sounds reasonable. Note that this does not mean that all flats should be 80 m2 - there may be a mixture if different sizes. You can assume that the residential will be naturally ventilated, with AC being used only when it gets too hot.

Monday, March 1, 2010

Singapore stats

For statistics in Singapore, there is a good government site with some useful data here:

Saturday, February 27, 2010

Sky View Factor (update)

I have updated the sky view factor otl - fixed some bugs

The link is the same as before:

Friday, February 26, 2010

Unobstructed Vision Area

The Unobstructed Vision Area (UVA) is a useful way of assessing how much view each window in the design gets. Here is an otl to calculate the UVA. This gives UVA as a percentage - 100% means that you have a 100% view, while 0% means you have no view at all (i.e. there is a wall directly in front of your window).
See Professor Edward Ng's paper on the use of UVA in Hong Kong.